Multi-Function Tests.
- Static and dynamic friction test
- Adhesive, abrasive and scratching wear test
- Multi-cycle, multi-axis fatigue wear test
- Pull-off adhesion wear test
|
Test Modes
- Pin on Disc Test （One Pin）
（ISO 7148, ASTM G 99）
- Ball on Disc test （One Ball ） （ISO 7148）
- Sliding Contact Wear
- Bearing Life
- Block on ring module
- Scuffing Wear
- Reciprocating motion test
- Scratch module
|
Rotation module
- Pin on Disc Test （One Pin） （ISO 7148, ASTM G 99）
- Ball on Disc test （One Ball ） （ISO 7148）
- Four-ball test Pin /Ball on disc Tests
- Upper Pin or ball specimen : Stationary or automatic positioning on disc radius : RPM 1 ~ 1,000 rpm
- Automatic radial positioning : Range 70mm – Resolution 0.1mm Four-Ball Tests
- Upper ball : Stationary in the center
- Three lower balls : Immersed in fluid bath Disc-Ring on Disc Tests
- Upper Disc or Ring : up to 100mm : Stationary : RPM 1 ~ 1,000 rpm |
| |
| |
Linear Reciprocation module
- Upper Pin/ Ball/ Block
- Distance : 0 ~50mm
- Reciprocating Frequency : 0.1 ~ 15Hz
- Reciprocating Stroke : 0.1 ~ 25mm
|
Wear and Fretting Tests
- Upper Pin, ball, Block specimen : Stationary or automatic positioning on disc radius
- Automatic positioning Distance 50mm– Resolution 1 ? Engine tests
- Upper piston ring: Stationary
- Lower cylinder liner : reciprocating
|
Block on Ring Test module
- Upper Block : 5mm x 15mm x 10mm
- Lower Ring : Dia. 20 ~ 70mm
- Rotation speed : 1 ~ 1,000 rpm
|
Block/Pin/Ball-on Ring Tests
- Upper Pin : Dia. 3 ~ 10mm : Flat, spherical or conical end
|
| Test Modes |
| |
| System software | | Sample fixture |
 |  |
 |
在線咨詢
聯系電話：021-56615302
我的位置：
